Vision-related quality of life with myopia management: A review

The disease of myopia has come into focus as a worldwide public health concern. Myopia has shown increasing prevalence, incidence at earlier age and progression to a higher degree. Progressive increase in degree of myopia is strongly associated with increase in axial length of the eye. Various interventions have been shown to slow axial elongation in children. These interventions have been studied to assess efficacy in slowing axial elongation and correction of vision. In addition, research into quality of vision, risk of adverse events, overall safety and impact on vision-related quality (VR-QoL) of life has been pursued. In contrast, studies have been published to demonstrate the risks of myopia, high myopia and increased axial length. This review will discuss VR-QoL assessment on the most effective and most commonly prescribed interventions to slow axial elongation and myopia progression. The patient attributes considered are VR-QoL scores from validated instruments. The development and use of validated survey instruments to assess the patient-reported outcomes is discussed. The review demonstrates that there are numerous factors that may impact VR-QoL to evaluate in the decision-making process when eye care providers consider when, how and if to prescribe myopia management (MM) for children with myopia.     

Effects of hydrogen plasma treatment on the physical and chemical properties of tin oxide thin films for ambipolar thin-film transistor applications

In this study, we investigated the physical and chemical properties of H₂ plasma-treated tin oxide (SnO_X) thin films, followed by their applications in ambipolar thin-film transistors (TFTs). Finely controlled H₂ implantation was carried out using a reactive-ion-etching system at a radio frequency power of 30 W and under various exposure times. H₂ plasma treatments induced changes in the chemical structures and surface morphologies of the SnO_X thin films, including a partial phase transformation of Sn and SnO to SnO₂. The defects originating from oxygen vacancies (O_Vacs) in the SnO_X thin films were passivated by H via the formation of Sn–H bonds, which decreased the density of subgap states in the SnO_X thin films. The H₂ plasma-treated SnO_X TFTs showed considerably improved ambipolarity and electrical performance. Complementary metal–oxide–semiconductor (CMOS) logic inverters comprising H₂-plasma-treated ambipolar SnO_X TFTs exhibited a maximum gain of 34.5 V/V at a supply voltage of 10 V. The results of this study present the meaningful investigation of H₂ plasma-treated ambipolar SnO_X TFTs that can be used to fabricate CMOS circuits for various applications.     

Molecular design for thermally stable SiZrBOC structure from single source precursor with high ceramic yield

A new type of high-temperature-resistant SiZrBOC ceramics was prepared by sol-gel method using polymethyl-hydro siloxane (PMHS), boric acid (B(OH)₃), and n-propyl zirconate (Zr(OPr)₄) as raw materials. After high-temperature pyrolysis, the SiZrBOC precursor was transformed into a crystalline ceramic material with a yield of 89.5 wt%. Fourier infrared spectroscopy (FT-IR) and thermogravimetric analysis (TGA) were applied to characterize the polymer-ceramic conversion process and thermal behavior of ceramic precursors. According to the results, the addition of boron elements led to the formation of Si-O-B links in the system. X-ray diffraction (XRD) and transmission electron microscopy (TEM) were used to study the phase composition and microstructure of SiZrBOC ceramics. Finally, the oxidation test at 1200 °C revealed that SiZrBOC ceramics with a boron/zirconium molar ratio of 2.5:1 exhibited the best oxidation resistance at a weight gain of 0.4 wt% only.     

Deterministic and probabilistic ship pitch prediction using a multi-predictor integration model based on hybrid data preprocessing,reinforcement learning and improved QRNN

The deterministic and probabilistic prediction of ship motion is important for safe navigation and stable real-time operational control of ships at sea. However, the volatility and randomness of ship motion, the non-adaptive nature of single predictors and the poor coverage of quantile regression pose serious challenges to uncertainty prediction, making research in this field limited. In this paper, a multi-predictor integration model based on hybrid data preprocessing, reinforcement learning and improved quantile regression neural network (QRNN) is proposed to explore the deterministic and probabilistic prediction of ship pitch motion. To validate the performance of the proposed multi-predictor integrated prediction model, an experimental study is conducted with three sets of actual ship longitudinal motions during sea trials in the South China Sea. The experimental results indicate that the root mean square errors (RMSEs) of the proposed model of deterministic prediction are 0.0254°, 0.0359°, and 0.0188°, respectively. Taking series #2 as an example, the prediction interval coverage probabilities (PICPs) of the proposed model of probability predictions at 90%, 95%, and 99% confidence levels (CLs) are 0.9400, 0.9800, and 1.0000, respectively. This study signifies that the proposed model can provide trusted deterministic predictions and can effectively quantify the uncertainty of ship pitch motion, which has the potential to provide practical support for ship early warning systems.     

Kinetic Monte Carlo simulation of hydrogen production from photocatalytic water splitting in the presence of methanol by 1 wt% Au/TiO2

In this research, using the kinetic Monte Carlo simulation (KMC), the hydrogen production from a water-methanol mixture using Au/TiO₂ photocatalyst is investigated. A mechanism is proposed, and the rate constants of the reaction steps are specified. The reaction rate constants of different steps and the concentration of the active sites on the photocatalyst surface were determined. An excellent match between simulated and experimental data confirms the results. The electron-hole pair production, methanol adsorption on the photocatalyst surface, and electron-hole recombination steps are considered the most critical steps. To study the effects of independent variables (initial concentration of methanol, photocatalyst dosage, pH, and time of reaction) on the produced hydrogen, a combination of KMC simulation and design of experiment was employed. The concentration of photocatalysis has the highest and pH has the lowest effect on the hydrogen production. The optimal conditions for photocatalytic hydrogen production are presented.     

复杂环境下氧化铝储槽定向爆破拆除

在较为复杂的环境下,爆破拆除钢筋混凝土氧化铝储槽。该储槽自重大、呈圆形,内有4根立柱支撑下料漏斗。为使储槽顺利定向倒塌,通过爆破方案选择、参数确定,采取梯形切口和预处理以及安全防护和减振措施,使储槽爆破拆除获圆满成功。     

基准平面垂直断面法在爆破漏斗试验中的应用

系统阐述了基准平面垂直断面法在爆破漏斗试验中测量爆破漏斗体积的基本原理,并将隧道激光断面仪应用于金厂河矿1 750 m水平15^#采场底部切割巷道爆破漏斗试验爆破漏斗体积测量中。通过与传统体重法等计算法所得漏斗体积分析比较,结果表明基于隧道激光断面仪与3D Mine软件分析的基准平面垂直断面法实用性强、操作方便、结果直观可靠,达到试验预期目的。     

Meal patterns of weaned dairy calves are affected by previous dietary experience and associated with competition surrounding individual feed bins

The objective of this study was to evaluate how meal patterns of recently weaned and group-housed dairy calves are subject to effects of previous dietary experience and associated with competition for feed. During the preweaning period, Holstein heifer and bull calves were provided diets differing in provision and presentation of forage as follows: (1) pelleted starter only (n = 12), (2) starter and chopped coastal bermudagrass provided in separate buckets (n = 13), (3) starter and chopped coastal bermudagrass mixed together in the same bucket (n = 15), or (4) starter, chopped coastal bermudagrass, and liquid molasses mixed together in 1 bucket (n = 13). At 58 ± 2 (mean ± standard deviation) days of age, following weaning, calves were mingled between treatments and moved into group housing in weekly age-based cohorts (7 ± 2 calves/group; 8 groups total), and all were provided the mixed diet (without molasses). Within group pens, calves were fed individually using the Calan Broadbent feeding system (American Calan Inc.). Calves were monitored for 1 wk following introduction to the group pen. Feed intake was measured daily. Behavioral data, describing feeding times and competition for feed, were recorded continuously for 48 h beginning after a 5-d adaptation to the group pen. Calves previously provided starter only had longer, less frequent meals than calves previously provided forage in any form, and they tended to consume less feed compared with those previously provided starter and hay separately, with calves previously provided mixed diets having intermediate intakes. We observed occurrences of displacements at bins, which were followed by replacements and feed stealing on some occasions, where 34% of calves consumed feed from a bin assigned to another calf on at least 1 occurrence, and 64% of calves were stolen from at least once. Competition at feed bins was not affected by previous dietary treatments, but was associated with meal patterns. Actor displacement rate was negatively associated with meal frequency and duration, but calves that were displaced more often were those that spent more time feeding. These results suggested a possible carryover effect of previous exposure to forage on postweaning meal patterns following a dietary change. Further, we found that competitive behavior varied considerably between individuals, occurring frequently despite feeding calves using individually-assigned feeding bins, and was associated with meal characteristics. These results highlighted the importance of considering both previous dietary experience and social factors when evaluating feeding behavior.     

Improving accuracy of automatic optical inspection with machine learning

Electronic devices require the printed circuit board(PCB)to support the whole structure,but the assembly of PCBs suffers from welding problem of the electronic components such as surface mounted devices(SMDs)resistors.The automated optical inspection(AOI)machine,widely used in industrial production,can take the image of PCBs and examine the welding issue.However,the AOI machine could commit false negative errors and dedicated technicians have to be employed to pick out those misjudged PCBs.This paper proposes a machine learning based method to improve the accuracy of AOI.In particular,we propose an adjacent pixel RGB value based method to pre-process the image from the AOI machine and build a customized deep learning model to classify the image.We present a practical scheme including two machine learning procedures to mitigate AOI errors.We conduct experiments with the real dataset from a production line for three months,the experimental results show that our method can reduce the rate of misjudgment from 0.3%–0.5%to 0.02%–0.03%,which is meaningful for thousands of PCBs each containing thousands of electronic components in practice.     

南水北调中线总干渠藻类的生态调度

南水北调中线总干渠无在线调蓄水库,对藻类生态调度过程中出现的问题开展生态调度实现策略和实施方式研究。主要实现策略包括:划定自身的调蓄区,隔离生态调度对下游的影响;采用高效的渠池运行方式,减少生态调度时蓄量的反复调整;综合考虑安全、快速、平稳等需求,设定生态调度实施进程和方式。具体实施方式包括:将总干渠划分为流速调控区、调蓄区和正常运行区,分别实施等体积、控制蓄量和闸前常水位方式运行;将生态调度过程划分为充水阶段和泄水阶段,基于流速调控目标值、持续时长和水位降幅约束条件,确定各阶段时长和各分区的闸门群调控方案等。基于2018年3月输水工况,采用明渠一维非恒定流模型,仿真总干渠上游15个渠池的藻类生态调度过程。结果表明,生态调度可在3.5 d内完成,各渠池的平均流速由0.48 m/s增至0.93 m/s,持续时间超过2 h。在整个生态调度过程中,水位变化平稳,水位变幅符合安全阈值要求,下游渠道的正常运行未受生态调度明显影响。